Meca500 - Mitsubishi FX PLC Integration


This MecaNetwork example is sponsored by Gibson Engineering




Description


This MecaNetwork example features the Meca500 being used with a Mitsubishi FX5 PLC over TCP/IP. 

For the sample code or a customized solution, please get in touch with Gibson Engineering.


Components


Meca500 Robot : Go to site

Meca500 Firmware version 8.1.6 or above is required: Go to site

Mitsubishi FX5UC-32MT/DSS-TS PLC : Go to site


Attachments


Mecademic Function block Write-up Ver 2.0: User Guide with the setup steps

GOT project files, PLC project files and writeup: Go to site


Please note that these examples are provided as-is by either Mecademic or it's Partners. These can be used as a starting point for development and testing but Mecademic or it's partners are not under obligation to provide support and are not liable for any errors or unintended behavior caused by the examples. These examples could be updated over time.

Did you find it helpful? Yes No

Send feedback
Sorry we couldn't be helpful. Help us improve this article with your feedback.