PLC Examples
      Back to home
      1. Knowledge base
      2. Programming Examples
      3. PLC Examples

      Meca500 Allen-Bradley Micro800 PLC Integration

         

        This MecaNetwork example features the Meca500 being used with a Micro820 PLC over TCP/IP.

        The example program provided can also be adapted to a variety of other Micro800 PLCs.



        Components


        Meca500 Robot : Go to site

        Meca500 Firmware version 8.1.6 or above is required : Go to site

        Micro820 Programmable Logic Controller : Go to site

        Connected Component Workbench Software : Go to site


         

        Attachments


        Mecademic CCW TCPIP User Guide: User Guide with the setup steps
        Mecademic_CCW_Demo_V0_16_0.ccwsln : PLC program


        Please note that these examples are provided as-is by either Mecademic or it's Partners. These can be used as a starting point for development and testing but Mecademic or it's partners are not under obligation to provide support and are not liable for any errors or unintended behavior caused by the examples. These examples could be updated over time.