PLC Examples
      Back to home
      1. Knowledge base
      2. Programming Examples
      3. PLC Examples

      Meca500 - Mitsubishi FX PLC Integration

        This MecaNetwork example is sponsored by Gibson Engineering

         




         

        Description


        This MecaNetwork example features the Meca500 being used with a Mitsubishi FX5 PLC over TCP/IP. 

        For the sample code or a customized solution, please get in touch with Gibson Engineering.


         

        Components


        Meca500 Robot : Go to site

        Meca500 Firmware version 8.1.6 or above is required: Go to site

        Mitsubishi FX5UC-32MT/DSS-TS PLC : Go to site


         

        Attachments


        Mecademic Function block Write-up Ver 2.0: User Guide with the setup steps

        GOT project files, PLC project files and writeup: Go to site


        Please note that these examples are provided as-is by either Mecademic or it's Partners. These can be used as a starting point for development and testing but Mecademic or it's partners are not under obligation to provide support and are not liable for any errors or unintended behavior caused by the examples. These examples could be updated over time.